From: Mingzhou Nie (mnie@xxxxxxxxx)
Date: Sun Jun 02 2002 - 12:43:13 GMT-3
Yes, Dustin. Configure "dlsw icanreach mac-exclusive" on r1 achieves
the same thing. By doing that, R1 will inform R2 not to send explore
frame over the link for any other MAC.
http://www.cisco.com/warp/public/697/dlswfilter.shtml#macfilter2
Ming
--- Dustin.Yates@ercgroup.com wrote:
> Side note: search on just enchilada and one on just solie produced
> no
> results... so i tried frame and didn't get any results on that
> either. So,
> my apologies if this has already been discussed.
>
> Quoting from Section X: DLSw Configuration
> 1. Configure a DLSw TCP peer from R1, VLAN 1 to R2, VLAN 20. On VLAN
> 20,
> there is an SNA host with the MAC address of 2200.900e.0001. Allow
> only
> explorer frames destined toward this address to cross the DLSw peer.
>
> Sample solution downloaded from ciscopress uses the
> "dmac-output-list"
> option on the remote-peer statement on R1. While this works, would
> the
> "dlsw icanreach mac-exclusive" with the associated "dlsw icanreach
> mac-address 2200.900e.0001" command on R2 produce the same results?
>
> Any thoughts to the contrary???
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:21 GMT-3