From: CHIDI FRANCIS (eejiofor@xxxxxxxxx)
Date: Sun Jun 02 2002 - 01:45:51 GMT-3
Hi Group
This is a follow up on Bryan's question om Custom Queuing.
What if the question was to assign bandwith in the following order
dlsw 50%
ipx 25%
Others 25 %
How do we acheived the desired result since the byte count for each protocol
was not specified. Do we asumed the default byte count 1500 for all the
protocol.
Any help will be appreciated.
Manny
--- Bryan Ginman <ginmanb@westnet.com> wrote:
> I seem to remember a very good post a while back explaining how to do
> custom queueing with average byte counts and figuring the byte count into
> the average. The Archive database is down so I am unable to do a search for
> it.I am interested in the following:
> How would I set up my queues if I wanted to give DLSW 50% avg byte count
> 980. IPX 25% with a average byte count of 128 and say IP 25% with a avg
> byte count of 768. I am not looking for the command queue-list x queue x
> byte count command but how I would figure the avg byte counts into
> determining queue size.
>
> Cheers,
>
> Bryan
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:20 GMT-3