From: Andre Riscalla (riscalla@xxxxxxxxxxxxxxxxxxxxxxx)
Date: Sun Jun 02 2002 - 00:41:10 GMT-3
In that case, i think a good practice is to nail it down and configure a
router-id under each and every OSPF process... if it's not otherwise
specified in the lab, you can do it.
AR-
On Wed, 29 May 2002, Michael Popovich wrote:
> You'll just need to remember the rules that if you have loopback interfaces
> the highest IP wins. If you add them later you'll need to change the
> configurations for the virtual link or upon a reboot it is broken.
>
> MP
> ----- Original Message -----
> From: "Bauer, Rick" <BAUERR@toysrus.com>
> To: "'Jerry Haverkos'" <jhaverkos@columbus.rr.com>; "Ademola Osindero"
> <osindero@lagos.sns.slb.com>; <ccielab@groupstudy.com>
> Sent: Wednesday, May 29, 2002 3:34 PM
> Subject: RE: OSPF - practice approach
>
>
> > And what happens when you add more loopback interfaces and reload the
> > router? What if you have virtual links? Nail it up!
> >
> > -----Original Message-----
> > From: Jerry Haverkos [mailto:jhaverkos@columbus.rr.com]
> > Sent: Wednesday, May 29, 2002 3:56 PM
> > To: Ademola Osindero; ccielab@groupstudy.com
> > Subject: RE: OSPF - practice approach
> >
> >
> > A router-id will be picked for you, automatically.
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> > Ademola Osindero
> > Sent: Wednesday, May 29, 2002 12:02 PM
> > To: ccielab@groupstudy.com
> > Subject: OSPF - practice approach
> >
> >
> > Hi Group,
> >
> > I working on approaches of answering ques in the lab. Do I really need to
> > put a router id on my routers while configuring OSPF....am I allowed to
> > just pick up an ip address and use it?
> >
> > Regards
> >
> > Osindero Ademola
> > Schlumberger Network Solutions
> > Tel: 234 1 261 0446 Ext 5427
> > Fax 234 1 262 1034
> > email:osindero@lagos.sns.slb.com
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:20 GMT-3