From: Howard C. Berkowitz (hcb@xxxxxxxxxxxx)
Date: Sat Jun 01 2002 - 22:06:09 GMT-3
>Guys,
>
>For the command: metric weights tos k1 k2 k3 k4 k5
>To use bandwith only you set k1 =1, delay only k3 =1.
>What if you only want to use reliabilty only? What do you change?
>What are the effects of changing k2, k4 and k5?
>
>Thanks
Do observe that Cisco itself does not recommend using load or
reliability. A good deal of network research and experience has
shown that using these things in a conventional metric generally
leads to route oscillation and thrashing.
There are other ways to achieve the same result, such as connection
admission control with RSVP, etc., to deal with load, and MPLS shared
risk groups to deal with reliability.
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:20 GMT-3