From: Brian McGahan (brian@xxxxxxxxxxxxxxx)
Date: Sat Jun 01 2002 - 21:32:05 GMT-3
Kym,
Are you sure you added the broadcast keyword to your protocol
mapping? Paste your config.
Brian McGahan, CCIE #8593
Director of Design and Implementation
brian@cyscoexpert.com
CyscoExpert Corporation
Internetwork Consulting & Training
http://www.cyscoexpert.com
Voice: 847.674.3392
Fax: 847.674.2625
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
kym blair
Sent: Saturday, June 01, 2002 7:12 PM
To: ccielab@groupstudy.com
Subject: EIGRP over ATM
I cannot get EIGRP to form neighbor adjacencies over ATM. It may be
because
it uses multicast (224.0.0.10), but I'm not sure. My work-around
solution
is to install a tunnel across the atm link and add the tunnel interface
to
my eigrp domain, then passive-int the atm0 (no sense broadcasting hellos
if
no one is listening).
I've tried eigrp neighbor statements since atm is nbma; didn't help. I
tried pim sparse-mode with pim nbma-mode; didn't help.
Does anyone know the solution to get eigrp to work over atm?
Thanks.
Kym
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:20 GMT-3