From: elping (elping@xxxxxxxxxx)
Date: Fri May 31 2002 - 23:28:38 GMT-3
I have tried some thing similar as you
try this
on r2 e0 put ----.>ip igmp join 229.10.10.10
now put ethe frame on sparse-dense mode
that should work
when one is using auto RP one must use sparse-dense mode
Michael Popovich wrote:
> I have the following setup
>
> --E-----R2
> \
> \
> Frame
> / \
> / \
> R5 R6
> | |
> |---------E------|
>
> The multicast group of 229.10.10.10 is on the Ethernet segment of R2. I have
> R2 setup using Auto-RP with R2 being the RP and the Mapping Agent.
>
> R5 and R6 have 229.10.10.10 in the rp-mapping table and mroute cache pointing
> to the Ethernet interface of R2. Using PIM Sparse on the Frame and PIM Dense
> on the Ethernet segments.
>
> What do I need to do in order to ping 229.10.10.10? I can't right now and I
> thought I should be able to.
>
> TIA
>
> MP
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:13 GMT-3