From: Tommy C (tkc9789@xxxxxxxxxxx)
Date: Fri May 31 2002 - 15:04:33 GMT-3
Michael,
If I remember correctly, you need IP Pim nbma on r2's frame interface.
Tommy
>From: "Michael Popovich" <m.popovich@mchsi.com>
>Reply-To: "Michael Popovich" <m.popovich@mchsi.com>
>To: "CCIE GROUPSTUDY" <ccielab@groupstudy.com>
>Subject: Multicast Question
>Date: Fri, 31 May 2002 10:44:54 -0500
>
>I have the following setup
>
>--E-----R2
> \
> \
> Frame
> / \
> / \
> R5 R6
> | |
> |---------E------|
>
>The multicast group of 229.10.10.10 is on the Ethernet segment of R2. I
>have
>R2 setup using Auto-RP with R2 being the RP and the Mapping Agent.
>
>R5 and R6 have 229.10.10.10 in the rp-mapping table and mroute cache
>pointing
>to the Ethernet interface of R2. Using PIM Sparse on the Frame and PIM
>Dense
>on the Ethernet segments.
>
>What do I need to do in order to ping 229.10.10.10? I can't right now and I
>thought I should be able to.
>
>TIA
>
>MP
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:13 GMT-3