From: David Luu (wicked01@xxxxxxxxxxxxx)
Date: Thu May 30 2002 - 05:33:52 GMT-3
like i said, i have not done this lab yet and just skimmed through it...
if its a multipoint interface, you need to map the bridge
config-if# frame-relay map bridge dlci# broadcast
At 04:27 AM 5/30/2002 -0400, Yagnesh Patel wrote:
>I think you are missing an important point here.
>Transparent bridge is running STP and both spokes are connected to one
>multipoint interface one R1.
>
>
>David Luu wrote:
>
>>i have not done the lab myself, but this is how i think it should be
>>configured...
>>
>>bridging section step #1
>>-----------------
>>config# bridge 1 protocol ieee
>>config-if# bridge-group 1
>>
>>
>>bgp section step #3
>>----------------
>>config-router# aggregate-address 128.200.0.0 summary-only
>>
>>
>>
>>At 02:08 AM 5/30/2002 -0400, Yagnesh Patel wrote:
>>
>>>Hi,
>>> I am doing Skynet but couldn't find a good solution for Bridging
>>> section step#1 and BGP section step#3. I will be appreciated if someone
>>> can lead me to the right direction.
>>>
>>>Thansk
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:12 GMT-3