From: Taimoor Husain (taimoor@xxxxxxxxx)
Date: Wed May 29 2002 - 17:25:58 GMT-3
you can use the preference command under the dial peer. The lower the
preference the higher the priority and by defaulkt the preference will be
set to 1. Remember that the Cisco routers will also hunt on the dial peers,
depending on how you have it configured, so if your first dial peer is shut
down or does not connect the call it will try the next one and so on.
Regards,
----------------------------------------------------------------------------
----
:|: :|: Taimoor Husain
:| | |: :| | |: CCIE # 9315
.:| | | | | | |:. .:| | | | | | |:. taimoor@cisco.com
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:11 GMT-3