From: Nick Shah (nshah@xxxxxxxxxxxxxx)
Date: Wed May 29 2002 - 01:46:28 GMT-3
Joe,
What I have read is that it displays "hold time left " so, at no time you
should see it higher than your configured hold time...
So for eg. you have configged hold time as 30, then any figure less than 30
is fine (of course you shouldnt see less than 15 all the time, that means
the hold time is not working as expected).
The other curly aspect about hold time that I wasnt able to resolve was that
eventhough CCO says that if the hold time is less than 3 times of hello
interval, the hold time is automatically adjusted, it doesnt work that way.
You have to explicitly specify hello interval, and then also modify hold
time.
Thanks
Nick
----- Original Message -----
From: "Joe Morabito" <joe.morabito@cox.net>
To: <ccielab@groupstudy.com>
Sent: Wednesday, May 29, 2002 1:30 PM
Subject: Re: ipx eigrp timers
> I did see that, but the hold time keeps changing. If I do a show ipx
eigrp
> nei I get 14 secs, then I do it again and I get 10 secs, it changes but
will
> always be in a small range. Is this normal?
>
> Thanks.
>
> -Joe
>
> ----- Original Message -----
> From: "Nick Shah" <nshah@connect.com.au>
> To: "Joe Morabito" <joe.morabito@cox.net>; <ccielab@groupstudy.com>
> Sent: Tuesday, May 28, 2002 11:18 PM
> Subject: Re: ipx eigrp timers
>
>
> > Joe,
> >
> > Show ipx eigrp neighbors
> > shows you the hold time.
> >
> > I think there is no command to test the hello interval though.
> >
> > Thanks
> > Nick
> > ----- Original Message -----
> > From: "Joe Morabito" <joe.morabito@cox.net>
> > To: <ccielab@groupstudy.com>
> > Sent: Wednesday, May 29, 2002 12:38 PM
> > Subject: ipx eigrp timers
> >
> >
> > > I am working on some the quirky things I might see in the lab. There
> was
> > a
> > > thread that discusses ipx eigrp timers, etc. I made some changes, but
> can
> > not
> > > find the command to show the ipx eigrp hello interval (even when
> changed)
> > or
> > > the ipx eigrp hold timer (even when changed).
> > >
> > > It is late so maybe I missed something, but I tried just about every
> show
> > > command for show ipx ...
> > >
> > > Thanks.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:11 GMT-3