From: Logan, Harold (loganh@xxxxxxxxx)
Date: Tue May 28 2002 - 13:50:13 GMT-3
When you set that up, what's the output of your show ip bgp neighbors? Remember
, bgp networks won't show up in your routing tables unless you redistribute int
o bgp or use the network command. If you've done that already there are several
other possibilities, would you mind posting the configs?
> -----Original Message-----
> From: Edward Monk [mailto:emonk@att.net]
> Sent: Tuesday, May 28, 2002 12:16 PM
> To: ccielab@groupstudy.com
> Subject: BGP Update-Source issue
>
>
> I am trying to use loopbacks as the update-source with BGP and cannot
> get the following to work. I have rebooted etc....
>
>
>
> Both routers can ping the others loopback address. Anyone
> have any idea
> what is wrong?
>
>
>
>
>
> R8:
>
>
>
> router bgp 500
>
> bgp log-neighbor-changes
>
> neighbor 10.10.10.7 remote-as 400
>
> neighbor 10.10.10.7 update-source Loopback0
>
>
>
> R7:
>
>
>
> router bgp 400
>
> bgp log-neighbor-changes
>
> neighbor 10.10.10.8 remote-as 500
>
> neighbor 10.10.10.8 update-source Loopback0
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:10 GMT-3