From: Nigel Taylor (nigel_taylor@xxxxxxxxxxx)
Date: Mon May 27 2002 - 08:59:39 GMT-3
Francis,
Without doing a bunch of configurations that will still not
achieve what you're attempting, this will not work.
The goal here is to identify why and what options you would have in
attaining reachability from r5 to r8.
Since you're using RIP and the 140.20.x.x is all that RIP will care about
your first problem is that
"split-horizon" will cause these inbound redistributed routes to be
suppressed. r8 will not learn of a
network it locally advertises. Not only this, but if you were to disable
"split-horizon" nothing will change
since the 140.20.x.x will have a better route in the r8 RIB as a directly
connected route. In this
scanerio, the "default-network" command will not provide the solution as
well. Since the requirement
would be for a network other than the existing known or advertised networks
of r8.
Maybe if this was RIPv2.
Nigel
----- Original Message -----
From: "CHIDI FRANCIS" <eejiofor@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Monday, May 27, 2002 7:10 AM
Subject: REDISTRIBUTION
> Hi groups
>
> what is the best way to get the following ospf routes into igrp/rip
>
> 140.20.100.0/20
> 140.20.100.0/24
>
> when asbr is sharing 140.20.200.17/28 with the rip router
>
> (r6 is redistributing)
> ---r5-----------r6--------------------r8(rip)
> ospf route 140.20.200.16/28
> 140.20.100.0/20
> 140.20.100.0/24
> Any help without using default network or static route
> Thanks
> Manny
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:09 GMT-3