From: Murali Rao (muralig19@xxxxxxxxx)
Date: Fri May 24 2002 - 03:37:01 GMT-3
Under R3 dialer interface config, why are you using dialer
in-band command?? try taking this off..
--- Jeongwoo Park <jpark@wams.com> wrote:
> But I am stilling getting little bit different output
> after I put
> access-list like below;
>
> access-list 100 deny ospf any any
> access-list 100 deny ip any host 224.0.0.9
> access-list 100 permit ip any any
> dialer-list 1 protocol ip list 100
>
> output of debug dialer; this time I am getting this with
> more interval.
> R5#
> 1d08h: BR0 DDR: rotor dialout [priority]
> 1d08h: BR0 DDR: Dialing cause ip (s=170.100.2.1,
> d=255.255.255.255)
> 1d08h: BR0 DDR: Attempting to dial 8358661
> 1d08h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to
> up
> 1d08h: %DIALER-6-BIND: Interface BR0:1 bound to profile
> Di1
> 1d08h: %ISDN-6-CONNECT: Interface BRI0:1 is now connected
> to 8358661
> 1d08h: %ISDN-6-DISCONNECT: Interface BRI0:1 disconnected
> from 8358661 R3,
> call
> lasted 1 seconds
> 1d08h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to
> down
> 1d08h: BR0 DDR: has total 2 call(s), dial_out 0, dial_in
> 0
> 1d08h: %DIALER-6-UNBIND: Interface BR0:1 unbound from
> profile Di1
> 1d08h: BR0:1 DDR: disconnecting call
>
>
>
> -----Original Message-----
> From: Jeongwoo Park [mailto:jpark@wams.com]
> Sent: Wednesday, May 22, 2002 8:51 PM
> To: 'David Luu'; 'ccielab@groupstudy.com'
> Subject: RE: ISDN flapping !!
>
> Yes
> -----Original Message-----
> From: David Luu [mailto:wicked01@ix.netcom.com]
> Sent: Wednesday, May 22, 2002 8:34 PM
> To: Jeongwoo Park; 'ccielab@groupstudy.com'
> Subject: RE: ISDN flapping !!
>
> ah i see whats happening now....
> if you look at the destination ip for the dial cause, the
> ip is 224.0.0.9,
> which is the multicast address for RIPv2...
> and if you look at your previous debug you will notice
> that the line was
> brought up around every 30 seconds, which is the update
> interval for
> RIPv2...
>
> are you running RIPv2 on the router?
>
> At 08:21 PM 5/22/2002 -0700, Jeongwoo Park wrote:
> >This is what I got after deb dialer
> >It is still flapping
> >
> >JP
> >R5#
> >1d07h: BR0 DDR: rotor dialout [priority]
> >1d07h: BR0 DDR: Dialing cause ip (s=170.100.2.1,
> d=224.0.0.9)
> >1d07h: BR0 DDR: Attempting to dial 8358661
> >1d07h: %LINK-3-UPDOWN: Interface BRI0:1, changed state
> to up
> >1d07h: %DIALER-6-BIND: Interface BR0:1 bound to profile
> Di1
> >1d07h: %ISDN-6-CONNECT: Interface BRI0:1 is now
> connected to 8358661
> >1d07h: %ISDN-6-DISCONNECT: Interface BRI0:1
> disconnected from 8358661 R3,
> >call
> >lasted 1 seconds
> >1d07h: %LINK-3-UPDOWN: Interface BRI0:1, changed state
> to down
> >1d07h: BR0 DDR: has total 2 call(s), dial_out 0, dial_in
> 0
> >1d07h: %DIALER-6-UNBIND: Interface BR0:1 unbound from
> profile Di1
> >1d07h: BR0:1 DDR: disconnecting call
> >
> >-----Original Message-----
> >From: David Luu [mailto:wicked01@ix.netcom.com]
> >Sent: Wednesday, May 22, 2002 8:13 PM
> >To: Jeongwoo Park; 'ccielab@groupstudy.com'
> >Subject: Re: ISDN flapping !!
> >
> >do a show dialer, and see what the reason is for the
> line being brought up
> >
> >At 07:11 PM 5/22/2002 -0700, Jeongwoo Park wrote:
> > >Hi guys, Help !!
> > >Look at this logs
> > >00:19:35: %LINK-3-UPDOWN: Interface BRI0:1, changed
> state to up
> > >00:19:35: %ISDN-6-CONNECT: Interface BRI0:1 is now
> connected to 8358662
> > >00:19:36: %LINK-3-UPDOWN: Interface BRI0:1, changed
> state to down
> > >00:20:03: %LINK-3-UPDOWN: Interface BRI0:1, changed
> state to up
> > >00:20:03: %ISDN-6-CONNECT: Interface BRI0:1 is now
> connected to 8358662
> > >00:20:04: %LINK-3-UPDOWN: Interface BRI0:1, changed
> state to down
> > >00:20:31: %LINK-3-UPDOWN: Interface BRI0:1, changed
> state to up
> > >00:20:31: %ISDN-6-CONNECT: Interface BRI0:1 is now
> connected to 8358662
> > >00:20:31: %LINK-3-UPDOWN: Interface BRI0:1, changed
> state to down
> > >
> > >Yeah, definitely idsn line is flapping.
> > >Here is my config
> > >R3---------R5
> > >
> > >R3;
> > >Username R5 password 0 cisco
> > >
> > >interface BRI0
> > >no ip address
> > >no ip directed-broadcast
> > >encapsulation ppp
> > >ip ospf interface-retry 0
> > >ip ospf demand-circuit
> > >dialer pool-member 1
> > >isdn switch-type basic-ni
> > >isdn spid1 0835866101 8358661
> > >isdn spid2 0835866301 8358663
> > >ppp authentication chap
> > >ppp multilink
> > >!
> > >interface Dialer1
> > >ip address 170.100.2.6 255.255.255.0
> > >no ip directed-broadcast
> > >encapsulation ppp
> > >ip ospf interface-retry 0
> > >dialer in-band
> > >dialer string 8358662
> > >dialer string 8358664
> > >ppp authentication chap
> > >ppp multilink
> > >!
> > >dialer-list 1 protocol ip permit
> > >
> > >R5;
> > >Username R3 password 0 cisco
> > >
> > >interface BRI0
> > >no ip address
> > >no ip directed-broadcast
> > >encapsulation ppp
> > >dialer pool-member 1
> > >isdn switch-type basic-ni
> > >isdn spid1 0835866201 8358662
> > >isdn spid2 0835866401 8358664
> > >ppp authentication chap
> > >ppp multilink
> > >!
> > >interface Dialer1
> > >ip address 170.100.2.1 255.255.255.0
> > >no ip directed-broadcast
> > >encapsulation ppp
> > >dialer remote-name R3
> > >dialer string 8358661
> > >dialer string 8358663
> > >dialer pool 1
> > >dialer-group 1
> > >ppp authentication chap
> > >ppp multilink
> > >!
> > >dialer-list 1 ip protocol permit
> >
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:07 GMT-3