From: yijibin (yijibin@xxxxxxxxxxxxxxxx)
Date: Fri May 24 2002 - 01:48:27 GMT-3
Area range command also make a null route!
You can use 'no discard internel' to disable the ospf process creating the null
route
----- Original Message -----
From: "li jian hua" <jasonli@cisco.com>
To: "Jeongwoo Park" <jpark@wams.com>
Cc: <ccielab@groupstudy.com>
Sent: Friday, May 24, 2002 12:11 PM
Subject: Re: Work-around on using null interface
> area range command does not make null interface
>
> you can use area range command
>
> do not use summary-address command.
>
> rgds
>
> At 20:36 2002-5-23 -0700, Jeongwoo Park wrote:
> >Hi
> >I was wondering what could be equivalent to using null interface.
> >I was redistributing ospf route 170.100.100.6/27 into igrp with the summary
> >address of 170.100.100.0/24.
> >Once you summary under ospf, it is a must that you should use null
> >interface( ip route 170.100.100.0 255.255.255.0 null 0). Since using null
> >interface is considered static route, what could be the substitute for that?
> >I tried with distribute-list, but didn't work.
> >
> >Thanks
> >
> >JP
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:07 GMT-3