From: yijibin (yijibin@xxxxxxxxxxxxxxxx)
Date: Thu May 23 2002 - 22:37:28 GMT-3
Yes you can !
You can use distribute list in command with a interface to filter the route, Bu
t you must konw,This only control the route come into your route table, The rou
te still come into you ospf database.
If you use distribute-list out, you can only use with protocol key word. use d
istribute-list out with a interface is meaningless. For example , if you had r
edistribute the IGRP route into your ospf process, You can filter some IGRP rou
te useing the "distribute-list # out igrp" command
good luck!
----- Original Message -----
From: "Hansang Bae" <hbae@nyc.rr.com>
To: <ccielab@groupstudy.com>
Sent: Friday, May 24, 2002 5:34 AM
Subject: Re: distribute list OSPF
> At 10:23 AM 5/23/2002 -0400, Bruce Williams wrote:
> >Could someone explain or point me to the link on CCO that explains the
> >issues with using distibute list commands with OSPF. Either you cant use a
> >distribute-list out or distribute-list in with OSPF. I am not sure which one
> >it is or why.
>
>
>
> http://www.cisco.com/warp/public/104/9.html
> "Can I use the distribute-list in/out command with OSPF to filter routes? "
>
> hsb
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:07 GMT-3