From: Jeff Duchin (jduchin@xxxxxxxxxx)
Date: Thu May 23 2002 - 14:34:56 GMT-3
set spantree root [secondary] [vlan_list] [dia network_diameter]
Jeff
Jeff Duchin
Design Engineer
WAM!NET Atlantic Region
13600 EDS Drive, 5N-A47
Herndon, VA 20171
Office: (703) 736-4083
Mobile: (301) 305-0122
Fax: (703) 904-4012
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
peter brown
Sent: Thursday, May 23, 2002 1:12 PM
To: ccielab@groupstudy.com
Subject: spantree priority
If you want to make the switch the likely root bridge for a vlan do you use
set spantree priority 0 or set spantree priority 1. Fatkid says 1. What is
correct?
Help
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:06 GMT-3