From: Sasa Milic (smilic@xxxxxxxx)
Date: Tue May 21 2002 - 14:51:32 GMT-3
"protocol dlsw" can be used only with FST encapsulation. If you
use TCP, then you have to use access-list to identify port(s)
(don't forget 1981, 1982 and 1983 if you use dlsw priority).
Sasa,
CCIE No. 8635
> I have seen many posts regarding the access-list needed to capture DLSW
> packets,however there is the option of specifying dlsw as the protocol within
> the custom que list defenition. such as:
>
> queue-list 1 protocol dlsw 3
>
> is there a reason that you would want to use an access-list to identify the
> dlsw packets instead of using the above mentioned command??
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:06 GMT-3