From: Jeongwoo Park (jpark@xxxxxxxx)
Date: Thu May 23 2002 - 12:36:00 GMT-3
Ok, One down.
Dialer remote-name R5 was the reason why R3 was disconnecting a call right
away.
But I am still getting
1d19h: BR0 DDR: Dialing cause ip (s=170.100.2.1, d=255.255.255.255)
1d19h: BR0 DDR: Attempting to dial 8358661
1d19h: %LINK-3-UPDOWN: Interface BRI0:2, changed state to up
1d19h: %DIALER-6-BIND: Interface BR0:2 bound to profile Di1
1d19h: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 8358661 R3
1d19h: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1, changed state
to
down
1d19h: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access2,
changed
state to down
1d19h: %ISDN-6-CONNECT: Interface BRI0:2 is now connected to 8358661 R3
1d19h: %ISDN-6-DISCONNECT: Interface BRI0:1 disconnected from 8358661 R3,
call
lasted 121 seconds
1d19h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
1d19h: BR0 DDR: has total 2 call(s), dial_out 1, dial_in 0
1d19h: %DIALER-6-UNBIND: Interface BR0:1 unbound from profile Di1
1d19h: BR0:1 DDR: disconnecting call
1d19h: %DIALER-6-BIND: Interface Vi1 bound to profile Di1
1d19h: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up
1d19h: Vi1 DDR: dialer protocol up
1d19h: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:2, changed state
to
up
1d19h: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1,
changed
state to up
-----Original Message-----
From: David Luu [mailto:wicked01@ix.netcom.com]
Sent: Wednesday, May 22, 2002 11:57 PM
To: Jeongwoo Park; 'ccielab@groupstudy.com'
Subject: Re: ISDN flapping !!
put "dialer remote-name R5" on R3's dialer interface
At 07:11 PM 5/22/2002 -0700, Jeongwoo Park wrote:
>Hi guys, Help !!
>Look at this logs
>00:19:35: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
>00:19:35: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 8358662
>00:19:36: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
>00:20:03: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
>00:20:03: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 8358662
>00:20:04: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
>00:20:31: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
>00:20:31: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 8358662
>00:20:31: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
>
>Yeah, definitely idsn line is flapping.
>Here is my config
>R3---------R5
>
>R3;
>Username R5 password 0 cisco
>
>interface BRI0
>no ip address
>no ip directed-broadcast
>encapsulation ppp
>ip ospf interface-retry 0
>ip ospf demand-circuit
>dialer pool-member 1
>isdn switch-type basic-ni
>isdn spid1 0835866101 8358661
>isdn spid2 0835866301 8358663
>ppp authentication chap
>ppp multilink
>!
>interface Dialer1
>ip address 170.100.2.6 255.255.255.0
>no ip directed-broadcast
>encapsulation ppp
>ip ospf interface-retry 0
>dialer in-band
>dialer string 8358662
>dialer string 8358664
>ppp authentication chap
>ppp multilink
>!
>dialer-list 1 protocol ip permit
>
>R5;
>Username R3 password 0 cisco
>
>interface BRI0
>no ip address
>no ip directed-broadcast
>encapsulation ppp
>dialer pool-member 1
>isdn switch-type basic-ni
>isdn spid1 0835866201 8358662
>isdn spid2 0835866401 8358664
>ppp authentication chap
>ppp multilink
>!
>interface Dialer1
>ip address 170.100.2.1 255.255.255.0
>no ip directed-broadcast
>encapsulation ppp
>dialer remote-name R3
>dialer string 8358661
>dialer string 8358663
>dialer pool 1
>dialer-group 1
>ppp authentication chap
>ppp multilink
>!
>dialer-list 1 ip protocol permit
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:06 GMT-3