From: Dang Quang Minh (minhdq@xxxxxxxxxxxxx)
Date: Thu May 23 2002 - 09:17:55 GMT-3
Hi,
On the R5
tftp-server flash: c2500-jos56i-l.121-12.bin
Then try again from R6
R6#copy tftp flash
Regards
Minh
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Hung, Sing-Yu
Sent: Thursday, May 23, 2002 6:53 PM
To: ccielab@groupstudy.com
Subject: tftp
Dear,
How can I use cisco-2500 ios 12.1 as a tftp server? I can't do
this
at ios 12.1 as below
r5-------r6
r5: tftp server
r6: tftp client
r5 config:
!
!
tftp-server flash:
r5 output:
r5#sho ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-JOS56I-L), Version 12.1(12), RELEASE
SOFTWARE
(fc1)
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Mon 26-Nov-01 18:30 by kellythw
Image text-base: 0x0307EA04, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
BOOTLDR: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c),
RELEASE
SOFTWARE (fc1)
r5 uptime is 3 days, 5 hours, 36 minutes
System returned to ROM by reload
System image file is "flash:/c2500-jos56i-l.121-12.bin"
cisco 2500 (68030) processor (revision N) with 14336K/2048K bytes of
memory.
Processor board ID 21879059, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2102
r5#sho flas
r5#sho flash:
System flash directory:
File Length Name/status
1 16329000 /c2500-jos56i-l.121-12.bin
[16329064 bytes used, 448152 available, 16777216 total]
16384K bytes of processor board System flash (Read ONLY)
r6 output:
r6#
r6#copy tftp: flash
**** NOTICE ****
Flash load helper v1.0
This process will accept the copy options and then terminate
the current system image to use the ROM based image for the copy.
Routing functionality will not be available during that time.
If you are logged in via telnet, this connection will terminate.
Users with console access can see the results of the copy operation.
---- ******** ----
Proceed? [confirm]
Address or name of remote host [172.31.200.5]?
Source filename [c2500-jos56i-l.121-12.bin]?
Destination filename [c2500-jos56i-l.121-12.bin]?
Accessing tftp://172.31.200.5/c2500-jos56i-l.121-12.bin...
%Error opening tftp://172.31.200.5/c2500-jos56i-l.121-12.bin (No such
file
or directory)
r6#sho ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-I-L), Version 12.1(2), RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Tue 09-May-00 19:57 by linda
Image text-base: 0x0303E424, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c),
RELEASE
SOFTWARE (fc1)
r6 uptime is 1 hour, 28 minutes
System returned to ROM by reload
System image file is "flash:/c2500.bin"
cisco 2500 (68030) processor (revision N) with 6144K/2048K bytes of
memory.
Processor board ID 21862544, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2102
Bradford Hung
Pacific Century CyberWorks
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:06 GMT-3