tcp intercept

From: CCIE-Maillist (CCIE-Maillist@xxxxxxxxxx)
Date: Wed May 22 2002 - 11:09:41 GMT-3

• Next message: Jerry Haverkos: "RE: routing table vs. bgp table"
• Previous message: Sukhjit Singh: "Re: test"
• Next in thread: Tarek Sabry: "RE: tcp intercept"
• Maybe reply: Tarek Sabry: "RE: tcp intercept"
• Maybe reply: Bezverkhi, Serguei: "RE: tcp intercept"
• Maybe reply: Dang Quang Minh: "RE: tcp intercept"
• Maybe reply: CCIE-Maillist: "Re: tcp intercept"
• Maybe reply: Christopher Jarosz: "Re: tcp intercept"
• Maybe reply: yijibin: "Fw: tcp intercept"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
I am trying to configure tcp intercept but don't have any practical experience
with it. If a lab says that you are getting a lot of rogue packets and to
configure it such that hosts can get through every one and a half minutes, no
matter how many rogue packets you are getting- which setting do you set for
the 1.5 minutes?

I am looking on the webpage-
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fsecu
r_c/ftrafwl/scfdenl.htm

My guess is to set the watch timeout but can someone who has experience
confirm whether or not that is correct?

Thanks,
David

• Next message: Jerry Haverkos: "RE: routing table vs. bgp table"
• Previous message: Sukhjit Singh: "Re: test"
• Next in thread: Tarek Sabry: "RE: tcp intercept"
• Maybe reply: Tarek Sabry: "RE: tcp intercept"
• Maybe reply: Bezverkhi, Serguei: "RE: tcp intercept"
• Maybe reply: Dang Quang Minh: "RE: tcp intercept"
• Maybe reply: CCIE-Maillist: "Re: tcp intercept"
• Maybe reply: Christopher Jarosz: "Re: tcp intercept"
• Maybe reply: yijibin: "Fw: tcp intercept"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:04 GMT-3