From: David Luu (wicked01@xxxxxxxxxxxxx)
Date: Mon May 20 2002 - 16:03:42 GMT-3
could you draw a little ascii diagram on how its setup?
At 08:06 AM 5/20/2002 -0400, Larson, Chris (Contractor) wrote:
>I posted this on Thursday or Friday and have not gotten any response (which
>is surprising). So I am posting again in hopes someone can shed some light.
>
>
>What I would like to do is this:
>We have 2 hub locations where we are provided Internet service. These hub
>locations are equal distance for all the remote ends. I am trying to put a
>default information originate into OSPF at both hub sites so I can get both
>equal costs 0/0 routes on all remote routers pointing to both hub locations
>so traffic will be per destination load balanced to the sites.
>
>Both sites are equal costs to remotes, and the default info originate is
>being done as metric-type 2. Both 0/0 routes show up as type 5 in ospf
>database, but only one shows up in route table. Shouldn't there be 2 0/0
>routes in the table? Do you know why there isn't?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:02 GMT-3