From: Robert Miller (rmiller@xxxxxxxxxxxx)
Date: Sun May 19 2002 - 17:32:38 GMT-3
Try applying the access-list to your
dlsw remote-peer statement and not to
the soource-bridge statement.
Later..
Robert Miller
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Ted Richmond
Sent: Sunday, May 19, 2002 2:49 PM
To: ccielab@groupstudy.com
Subject: output-lsap-list
Hi,
I am new to this group - have a question on DLSW filtering.Here is my setup:
dspu-host-----------R1------dlsw--------R2-------dspu-pu
rsap:8,lsap:4 rsap:4,lsap8
Task: Prevent circuit between dspu peers by using output-lsap-list
Without any filters, circuit is formed between the peers. Then I configured
this access-list
R1# in tok0/0
source-bridge output-access-list 222
access-list 222 deny 0x0408 0x0000
access-list 222 permit 0x0000 0xffff
Even after configuring this & doing clear dlsw circuits, the circuit is up.
I tried changing 0x0408 to 0x0804 - invain. Then I removed access-list 222
(deny all) - the circuit comes up no matter what. I am stuck. Can anyone
please tell me where I am missing? Thanks in advance.
-Ted
---------------------------------
Do You Yahoo!?
LAUNCH - Your Yahoo! Music Experience
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:01 GMT-3