From: David Lee Steele, Jr. (d.steele2@xxxxxxxxxxx)
Date: Sat May 18 2002 - 23:44:21 GMT-3
Can you filter CDP with a type code? See this link to see why I ask and
if it helps answer the question:
http://www.cisco.com/univercd/cc/td/doc/product/lan/trsrb/cisnm.htm
David
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Harish DV/peakxv
Sent: Saturday, May 18, 2002 10:13 PM
To: David Luu
Cc: 'ccielab@groupstudy.com'; Zarny, Myo; nobody@groupstudy.com; Zhang,
Ou (David)
Subject: Re: Protocol Type-code
If you are referring to Karl solie, is it wrong. It should be 0x0000
0x0d0d
. Its in errata
Harish
David Luu
<wicked01@ix.netc To: "Harish
DV/peakxv" <harish.dv@peakxv.net>, "Zhang, Ou (David)"
om.com> <OuDavid.Zhang@gs.com>
cc:
"'ccielab@groupstudy.com'" <ccielab@groupstudy.com>, "Zarny, Myo"
05/18/2002 06:53 <Myo.Zarny@gs.com>,
nobody@groupstudy.com
PM Subject: Re: Protocol
Type-code
SNA is 0x0d0d 0x0000, you have it switched around
At 06:31 PM 5/18/2002 -0700, Harish DV/peakxv wrote:
>You can filter SNA with a single wildcard SAP of 0x0d0d.
>
>ex. = access list 201 <permit/deny> 0x0000 0x0d0d
>
>and for netbios, it is 0x0101
>
>ex= access-list 201 <permit/deny> 0xf0f0 0x0101
>
>-Harish
>
>
>
>
>
>
> "Zhang,
> Ou
>
> (David)" To:
> "'ccielab@groupstudy.com'" <ccielab@groupstudy.com>
> <OuDavid.Zhang@gs cc: "Zarny, Myo"
> <Myo.Zarny@gs.com>
> .com> Subject: Protocol
> Type-code
> Sent
> by:
>
> nobody@groupstudy
>
> .com
>
>
>
>
>
> 05/18/2002
> 05:29
>
> PM
>
> Please respond
> to
>
> "Zhang,
> Ou
>
> (David)"
>
>
>
>
>
>
>
>
>
>Anyone knows the protocol type-code for SNA and NetBios ? This is for
>DLSW
>protocol filtering exercise.
>
>-David
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:00 GMT-3