From: John Underhill (stepnwlf@xxxxxxxx)
Date: Sat May 18 2002 - 23:02:34 GMT-3
I have one of these routers in my lab.. if you are planning to use this as a
frame switch to 25xx routers, you will need 4x DB50DCE to DB60DTE cables, as
the interfaces on this router are DB50.. Anthony has these as well, listed
as A special order on his page.. you may want to try symmic,
i_connectus@yahoo.com , or bob@router-rip.com all on ebay..
good luck
----- Original Message -----
From: "cash2001" <cash2001@swbell.net>
To: <ccielab@groupstudy.com>
Sent: Saturday, May 18, 2002 9:42 PM
Subject: Cabling for CCIE lab
> I am putting together my lab and I am unsure of one area. I am familiar
> with the DB60 to DB60 DTC/DCE cable and I know they function as a
> crossover cable.
>
> My question is can a Cisco DB60 to RS232 (DB25) Male function the same.
> A link to the cable is below as well as the device. Just wanted to
> clear the confusion before I drop the money.
>
> Link to cable:
> http://www.anthonypanda.com/anthonypanda-CiscoCablesorEquivalent-CiscoDB
> 60toRS232DB25Male.htm
>
> link to device:
> http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem
> <http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2024082765>
> &item=2024082765
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:00 GMT-3