From: Tony (aamercado31@xxxxxxxxx)
Date: Sat May 18 2002 - 14:19:04 GMT-3
HI
try:
clear lin 1
a couple of times to clear out the console buffer and
then do:
rtr1
HTH
--- Rah Hussain <Rah@network-sol.com> wrote:
> Edmund,
> Your config 'looks' ok. As a quick test I would
> remove you loopback, and
> put the ip add under the Ethernet interface
> (no keepalive if not connected/no shut) and try
> that.
> And also check your cabling
>
> Rah
>
>
> -----Original Message-----
> From: Edmund Tham [mailto:edmund_tcm@hotmail.com]
> Sent: 17 May 2002 13:25
> To: ccielab@groupstudy.com
> Subject: Terminal Server problem
>
> Hi Group,
>
> I am having this problem with my 2511. It is
> configured as a terminal
> server. The 2511 is attached with a octal cable and
> one of the end of the
> octal cable is connected to the console of a router
> named RTRA. When I tried
>
> to reverse telnet to the routers, I don't see any
> output or input that the
> enter on the terminal server. But any configuration
> input that I done on the
>
> reverse telnet is actually input into the router
> RTRA through I can see any
> echo on the terminal server. This is a very strange
> problem. Any suggestion
> on what is the problem. Thanks.
>
> Edmund
>
> ACCESS_SERVER#s ru
> Building configuration...
>
> Current configuration : 781 bytes
> !
> version 12.1
> no service single-slot-reload-enable
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname ACCESS_SERVER
> !
> enable secret 5 $1$NECD$ytA7vLc9dzG5kPla7QcZn1
> !
> !
> !
> !
> !
> ip subnet-zero
> ip host RTR7 2007 1.1.1.1
> ip host RTR6 2006 1.1.1.1
> ip host RTR5 2005 1.1.1.1
> ip host RTR4 2004 1.1.1.1
> ip host RTR3 2003 1.1.1.1
> ip host RTR2 2002 1.1.1.1
> ip host RTR1 2001 1.1.1.1
> !
> !
> !
> !
> interface Loopback0
> ip address 1.1.1.1 255.255.255.0
> !
> interface Ethernet0
> no ip address
> shutdown
> !
> interface Serial0
> no ip address
> shutdown
> no fair-queue
> !
> interface Serial1
> no ip address
> shutdown
> !
> ip classless
> ip http server
> !
> !
> !
> line con 0
> line 1 16
> no exec
> transport input all
> line aux 0
> line vty 0 4
> password cisco
> login
> !
> end
>
> ACCESS_SERVER#telnet rtr1
> Trying RTR1 (1.1.1.1, 2001)... Open
>
>
>
>
>
>
>
>
>
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:00 GMT-3