From: Bruce Rogers (brogers@xxxxxxxxxxxxx)
Date: Sat May 18 2002 - 04:56:19 GMT-3
Edmund,
See the following link. You should be able to figure it out from there.
http://www.cisco.com/warp/public/793/access_dial/comm_server.html
Bruce
-----Original Message-----
From: Edmund Tham [mailto:edmund_tcm@hotmail.com]
Sent: Fri 5/17/2002 8:25 AM
To: ccielab@groupstudy.com
Cc:
Subject: Terminal Server problem
Hi Group,
I am having this problem with my 2511. It is configured as a terminal
server. The 2511 is attached with a octal cable and one of the end of t
he
octal cable is connected to the console of a router named RTRA. When I
tried
to reverse telnet to the routers, I don't see any output or input that
the
enter on the terminal server. But any configuration input that I done o
n the
reverse telnet is actually input into the router RTRA through I can see
any
echo on the terminal server. This is a very strange problem. Any sugges
tion
on what is the problem. Thanks.
Edmund
ACCESS_SERVER#s ru
Building configuration...
Current configuration : 781 bytes
!
version 12.1
no service single-slot-reload-enable
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname ACCESS_SERVER
!
enable secret 5 $1$NECD$ytA7vLc9dzG5kPla7QcZn1
!
!
!
!
!
ip subnet-zero
ip host RTR7 2007 1.1.1.1
ip host RTR6 2006 1.1.1.1
ip host RTR5 2005 1.1.1.1
ip host RTR4 2004 1.1.1.1
ip host RTR3 2003 1.1.1.1
ip host RTR2 2002 1.1.1.1
ip host RTR1 2001 1.1.1.1
!
!
!
!
interface Loopback0
ip address 1.1.1.1 255.255.255.0
!
interface Ethernet0
no ip address
shutdown
!
interface Serial0
no ip address
shutdown
no fair-queue
!
interface Serial1
no ip address
shutdown
!
ip classless
ip http server
!
!
!
line con 0
line 1 16
no exec
transport input all
line aux 0
line vty 0 4
password cisco
login
!
end
ACCESS_SERVER#telnet rtr1
Trying RTR1 (1.1.1.1, 2001)... Open
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:00 GMT-3