From: hong tony (aamercado31@xxxxxxxxx)
Date: Thu May 16 2002 - 18:28:07 GMT-3
HI
Please see:
http://www.cisco.com/warp/customer/473/57.html#Tables
Here is a snippet:
RIP routes are automatically redistributed into EIGRP,
and EIGRP routes are automatically redistributed into
RIP, without any redistribution commands being entered
by the user. Redistribution between different EIGRP
processes is not turned on by default.
EIGRP routes are preferred over RIP routes, except
when the external hop count in the EIGRP advertisement
is greater than the RIP hop count. The external hop
count is the RIP hop count that was used to advertise
this route when it originally entered the EIGRP
autonomous system.
Are you trying to do some type of filter
or
load balancing:
http://www.cisco.com/warp/customer/473/92.html
or
turning off the automatic redistribution:
http://www.cisco.com/warp/customer/473/33.html#routing
Redistribution can be turned off with the use of the
no redistribute protocol router subcommand.
--- yijibin <yijibin@choiceway.com.cn> wrote:
> Hi team
> Who can tell me ,how to control the ipx route
> selection ? So I can use some ipx route to another
> interface by perference.
> I say this qustion because , you kown , ipx use the
> eigrp route in perference to rip route. look the
> example bellow:
>
> eigrp frame-relay
> r1--------------------r2
> | |
> |_ ethernet rip_____|
>
>
> In this example ,the ipx will select the
> frame-relay link as the best route , not the
> ethernet link , even if the ethernet has the
> high bandwidth!!!
> Who can tell me how to control the route selection ?
> Thanks.
>
> yijibin
> ChoiceWay Technologies Co.,Ltd
> http://www.choiceway.com.cn
> E-mail:yijibin@choiceway.com.cn
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:58 GMT-3