From: elpingu (elping@xxxxxxxxxx)
Date: Thu May 16 2002 - 01:41:50 GMT-3
this is working fine.....
what you must do is sh ip ro 0.0.0.0.0 many times and you will notice that
the default preffered route will change .....
Hansang Bae wrote:
> At 04:49 AM 5/16/2002 +0100, kevin mitnick wrote:
> >Hansang,
> >
> >Even with the maximim-path set , I still get two
> >routes to default with only one prefered. Here is a
> >"show ip route" I captured from rouer A
> >Gateway of last resort is 165.21.200.9 to network
> >0.0.0.0
> >
> >[snip]
> >00:01:36, Serial0.2
> >O*E2 0.0.0.0/0 [110/1] via 165.21.200.9, 00:01:36,Serial0.2
> > [110/1] via 165.21.200.14, 00:01:37,Serial0.3
>
> It will do two by default (as I recall) and you will only require "max-path"
if you want more than 2 (up to 6). But I see two routes to 0/0....
>
> Remember it's not like BGP output.... there isn't a ">".
>
> The output above is saying you can get to 0/0 via s0.2 *AND* S0.3.
>
> With fast-switching turned on, it will round robin between the two based on t
he destination IP address' cache. If you're using CEF, source/destination tupl
e will determine which interface is used.
>
> hsb
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:58 GMT-3