From: donny.mateo@xxxxxxxxxxxxxxxxxx
Date: Thu May 16 2002 - 00:56:23 GMT-3
Hi all,
I was upgrading my flash memory when the router came up with this message
ERR: Invalid chip id 0x80B5 (reversed = 0x1AD ) detected in System flash
The bootstrap Software is BOOTFLASH: 3000 Bootstrap Software (IGS-RXBOOT),
Version 10.2(5), RELEASE SOFTWA
RE (fc1)
The flash already contains an IOS from the previous router..and it works ok. I
can upload f to TFTP server and all, but I can't download a new IOS to the
flash.
Was thinking if I could move this 2 piece of flash to another router and upload
IOS, and then moved them back to this router...will it work. It seems that the
router has no problem of reading the flash.is just the part of writing into the
flash...
Has anybody has the same problem, The other router with Bootstrap Software
version 11.0 doesn't seems to have any problem.... or how can I upgrade this
Bootstrap software(/Hardware ? ) ?
Thanks in advance
Donny
This message is for information purposes only and its content
should not be construed as an offer, or solicitation of an offer,
to buy or sell any banking or financial instruments or services
and no representation or warranty is given in respect of its
accuracy, completeness or fairness. The material is subject
to change without notice. You should take your own independent
tax, legal and other professional advice in respect of the content
of this message. This message may contain confidential or
legally privileged material and may not be copied, redistributed
or published (in whole or in part) without our prior written consent.
This email may have been intercepted, partially destroyed,
arrive late, incomplete or contain viruses and no liability is
accepted by any member of the Credit Agricole Indosuez group
as a result. If you are not the intended recipient of this message,
please immediately notify the sender and delete this message
from your computer.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:58 GMT-3