Re: How to boot a router from a network file?

From: Harish DV/peakxv (harish.dv@xxxxxxxxxx)
Date: Wed May 15 2002 - 02:01:37 GMT-3

• Next message: Budiman Notorahardjo: "ISDN Dialer Map"
• Previous message: Phil: "RE: Cisco 2504, XMODEM"
• Maybe in reply to: Jacky J. Zhou: "How to boot a router from a network file?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
you can.

use "boot system tftp <file name> <tftp server ip add>"
dont forget to do a wr mem!
Also make sure that the router has 16 MB dram

-Harish

                      "Jacky J. Zhou"

                      <jacky.mail@roger To: ccielab@groupstudy.com

                      s.com> cc:

                      Sent by: Subject: How to boot a router f
rom a network file?
                      nobody@groupstudy

                      .com

                      05/14/2002 06:24

                      PM

                      Please respond to

                      "Jacky J. Zhou"

Hi, guy,

I have a 25xx router. Its' flash memory is not enough for a IOS 12.1. Can I
boot it from a network file in a TFTP server? If I can, how should I config
it?

Jack

• Next message: Budiman Notorahardjo: "ISDN Dialer Map"
• Previous message: Phil: "RE: Cisco 2504, XMODEM"
• Maybe in reply to: Jacky J. Zhou: "How to boot a router from a network file?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:56 GMT-3