From: David (david_knot@xxxxxxxxx)
Date: Tue May 14 2002 - 15:25:36 GMT-3
ok, it is done.
used:
ip forward-protocol udp
ip helper-address 1.1.1.1
i.e. open all udp ports temporarily
--- Malcolm Price <malcolm@lanbase.com> wrote:
> NT is renowned for using netbios. I'd say you'd need
> ports UDP 137,138 and
> 139 for starters.
>
> Hope this helps,
> Regards,
> Malcolm
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com]On Behalf Of
> David
> Sent: Tuesday, May 14, 2002 6:52 PM
> To: ccielab@groupstudy.com
> Subject: OT: BDC install on remote LAN
>
>
> Guys
>
> Need some urgent help on this OT please.
>
> Trying to install NT 4 Backup Domain Controller BDC
> on
> a remote LAN across a .5 m lease line. The Primary
> domain Controller PDC is on a different LAN to where
> the new BDC is being installed.
>
> The new BDC is fauling to locate existing PDC over
> the
> WAN. I know that I probaly need "IP helper-address
> <PDC IP address>" on the router's e0 that is on the
> new LAN (where BDC is being installed. But this
> alone
> does not work. Anyone know what extra UDP ports I
> need
> to open?
>
> thanks
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:56 GMT-3