From: Todd Carswell (acarswell@xxxxxxxxx)
Date: Sat May 11 2002 - 22:08:57 GMT-3
David,
There are 2 rules regarding the "ip default-network" command:
1. The default network must be classful
2. The default network must be in your routing table but not one of your
directly connected networks. (i.e. If you're running igrp for the
150.10.0.0 network, your default network cannot be 150.10.0.0)
I've run into this problem before. I kept typing in the default-network
command and it was useless!!! Then I found out about the rules that
regulate the use of this command.
HTH
Todd Carswell
----- Original Message -----
From: "Zhang, Ou (David)" <OuDavid.Zhang@gs.com>
To: <ccielab@groupstudy.com>
Sent: Saturday, May 11, 2002 8:36 PM
Subject: Generate Default Routes for IGRP
> All,
>
> Can some one show me the exact commands to generate a default route for
IGRP
> ? I've used 'ip default-network x.x.x.x', but had no luck to generate a
> default route. Please advise.
>
> -David
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:54 GMT-3