From: George Stylianou (georges@xxxxxxxx)
Date: Fri May 10 2002 - 14:40:21 GMT-3
The reason is that I wanted to make use of the spare msfc as another router.
I was just curious to know if anyone has done this. Probably wont do it this
was anyway.
Thanks again
G
-----Original Message-----
From: MADMAN [mailto:dmadlan@qwest.com]
Sent: Friday, May 10, 2002 15:35
To: George Stylianou
Cc: ccielab@groupstudy.com
Subject: Re: FlexWAN & MSFC mapping
Sure I suppose you can, I have never done that and don't understand why
you don't want redundancy at layer3 and your WAN connections via the
flexwan.
Dave
George Stylianou wrote:
>
> I was interested to know whether I could run them sepearately and only
> use the flex wan for the one sup, and didn't want the flex wan to
> failover to the other sup -- in other words I would continue to have
> layer 2 redundancy with the 2 x sups but no redundancy at a layer 3
> level.
>
> -----Original Message-----
> From: MADMAN [mailto:dmadlan@qwest.com]
> Sent: Thursday, May 09, 2002 23:14
> To: George Stylianou
> Cc: ccielab@groupstudy.com
> Subject: Re: FlexWAN & MSFC mapping
>
> I don't quite follow you here. The problem with a flexwan and
> redundant sup/MSFC's is if you lost a SUP/MSFC you had to manually
> configure the backup MSFC. So someone came up with config-sync to
> address this problem but config-sync with it's goofy alt commands etc
> has it's own issues so someone even smarter came up with SRM.
>
> Are you saying that you have automatic redundancy with two sups??
> How are you able to get redundancy on the flexwan if not running
> config-sync or SRM???
>
> Dave
>
> George Stylianou wrote:
> >
> > Hi,
> >
> > Anyone know if this is possible.
> >
> > We have 2 Supervisor cards with MSFC's and would like to run them
> > separately. We also have a FlexWAN card. When the one msfc is
> > reloaded the flexWAN is mapped to the other MSFC. How do we make it
> > switch back to the orignal MSFC without reloading the one that the
> > FlexWAN is currently mapped to.
> >
> > Thanks
> > George
> >
> > George Stylianou
> > Network Engineer (CCNP)
> > Internet Solutions
> > Tel: (+27 11) 283 5427
> > Cell:(+27 83) 325 6894
> > Fax: (+27 11) 283 5401
> > E-mail: georges@is.co.za
> > Web: www.is.co.za
> >
> > "This e-mail may contain confidential information and may be legally
> > privileged and is intended only for the person to whom it is
> > addressed. If you are not the intended recipient, you are notified
> > that you may not use, distribute or copy this document in any manner
> > whatsoever. Kindly also notify the sender immediately by telephone,
> > and delete the e-mail. When addressed to clients of the company from
> > where this e-mail originates ("the sending company ") any opinion or
> > advice contained in this e-mail is subject to the terms and
> > conditions expressed in any applicable terms of business or client
> > engagement letter . The sending company does not accept liability
> > for any damage, loss or expense arising from this e-mail and/or from
> > the accessing of any files attached to this e-mail."
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:54 GMT-3