From: Jason Sinclair (sinclairj@xxxxxxxxxxxxxxx)
Date: Fri May 10 2002 - 02:10:29 GMT-3
Garcia,
You are right - just a typo.
Cheers,
Jason Sinclair CCIE #9100
Manager, Network Control Centre
POWERTEL
Ground Level, 55 Clarence Street,
SYDNEY NSW 2000
AUSTRALIA
office: + 61 2 8264 3820
mobile: + 61 416 105 858
* sinclairj@powertel.com.au
-----Original Message-----
From: garcia [mailto:e_garcia@primenet.com]
Sent: Friday, 10 May 2002 15:07
To: Jason Sinclair
Subject: Re: DLSW dynamic peer over ISDN with netbios
clients..
Shouldn't the ext acl 199 and 101 match?
----- Original Message -----
From: Jason Sinclair <sinclairj@powertel.com.au>
To: 'Curtis Phillips' <cphillips@suscom.net>;
<ccielab@groupstudy.com>
Sent: Thursday, May 09, 2002 5:10 PM
Subject: RE: DLSW dynamic peer over ISDN with netbios
clients..
> Curtis,
>
> Do you have an ACL to control your DDR? You need to ensure
that only DLSW
> connections can bring up the link and hence need to use
the following:
>
> access-list 199 permit tcp any eq 2065 any
> access-list 199 permit tcp any any eq 2065
> dialer-list 2 protocol ip list 101
>
> This will ensure that even if NETBIOS packets reach the
BRI, the are not
> deemed interesting. Remember that DLSW is transporting
your NETBIOS,
rather
> than bridging it directly, hence you also need to ensure
that all NETBIOS
> ints are configured for DLSW.
>
> If this does not help, please post the total configs you
have.
>
> Regards,
>
> Jason Sinclair CCIE #9100
> Manager, Network Control Centre
> POWERTEL
> Ground Level, 55 Clarence Street,
> SYDNEY NSW 2000
> AUSTRALIA
> office: + 61 2 8264 3820
> mobile: + 61 416 105 858
> * sinclairj@powertel.com.au
>
>
>
>
> -----Original Message-----
> From: Curtis Phillips [mailto:cphillips@suscom.net]
> Sent: Thursday, 9 May 2002 23:12
> To: ccielab@groupstudy.com
> Subject: DLSW dynamic peer over ISDN with netbios
> clients..
>
> Hello All,
>
> I have been trying unsuccessfully to keep BRI interfaces
> down while using
> dynamic tcp peers betwwen two routers
> connected by ISDN.
>
> The peers are not forming a DLSW cir but are connecting
> intermittantly.
>
> I found a dlsw netbios keepalive-filter command which has
> been apllied to
> both dlsw peers.
> the thing continues to come up and teh debug output
> indicates netbios packsets
> are causing it.
> Routing protocols are not the isssue as I am using static
> routing.
> Anyone see any issues or have any lucjk with a similiar
> config?
>
>
> Here are the pertinent area of my configs..
>
> R6
> dlsw local-peer peer-id 15.15.6.6 promiscuous
> dlsw remote-peer 0 tcp 15.15.5.5 keepalive 0
> lsap-output-list 200 timeout 90
> dynamic
> access-list 200 permit 0xF0F0 0x0101
> dlsw bridge-group 1
> dlsw netbios-keepalive-filter
>
>
>
> R5
> dlsw local-peer peer-id 15.15.5.5
> dlsw remote-peer 0 tcp 15.15.6.6 keepalive 0
> lsap-output-list 200 timeout 90
> dynamic
> access-list 200 permit 0xF0F0 0x0101
> dlsw bridge-group 1
> dlsw netbios-keepalive-filter
>
>
> Thanks,
>
> Curtis
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:54 GMT-3