From: Praveen Bahethi (pbahethi@xxxxxxxxxxxxxxxxxxx)
Date: Wed May 08 2002 - 19:04:30 GMT-3
David and David,
I'm running into the same issue. I've got DL380 G2 1.266 HZ processor, 1GB
RAM, 2 18.2GB SCSI HD.
The Cisco website refers to the box as being a valid CCM platform, but the
Spherion (sp?) install crashes after disk 4 with the blue screen of death on
the Windows 2000, 'inaccessible boot device'
I've updated the bios and am still unable to get around the problem using
3.12(c) CCM software.
I personally feel the problem is with the Smart Array 5i not being
recognized by Spherion. I'm looking into getting 3.2 CCM software and hope
they've got a good Spherion load.
I'll update you on my progess. I got a call into TAC about this same issue
also.
V/R,
Praveen
----- Original Message -----
From: "David" <david_knot@yahoo.com>
To: <Dave.Craddock@avon.com>
Cc: <ccielab@groupstudy.com>; <nobody@groupstudy.com>
Sent: Wednesday, May 08, 2002 3:50 PM
Subject: Re: OT: Cisco CallManager
> i patched the box with compaq bios but will also try
> CCO bios
>
> what u said could be the answer on the varing
> software.
>
>
> --- Dave.Craddock@avon.com wrote:
> > Hi David
> > I think that the call manager that comes with
> > the Cisco box has a
> > different installer than the software only version
> > that you need to get to
> > load onto a DL380. Have you also tried the BIOS
> > updates that are on CCO for
> > the Compaq box ?
> >
> > HTH
> >
> > Dave
> >
> >
> >
> >
> >
> >
> > David
> >
> >
> > <david_knot@ya To:
> > ccielab@groupstudy.com
> >
> > hoo.com> cc:
> >
> >
> > Sent by: Subject:
> > OT: Cisco CallManager
> >
> > nobody@groupst
> >
> >
> > udy.com
> >
> >
> >
> >
> >
> >
> >
> >
> > 08/05/2002
> >
> >
> > 20:57
> >
> >
> > Please respond
> >
> >
> > to David
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > I'm trying to installa demo/training Cisco
> > CallManager
> > 3.1 (CCM) server on Compaq DL380 with 512M RAM
> > (non-Cisco branded - privately bought). Having gone
> > through all the install steps & can't launch CCM.
> > The
> > same CDs install works fine on Cisco 780 box.
> >
> > I understand Cisco make CCM work only with IBM &
> > Compaq servers, but does this mean you can't get a
> > machine independently & put the CCM software on it?
> > I
> > think they use the box ROMs to lock it with
> > particular
> > brands. So can't see why the Compaq Proliant DL 380
> > (which is in Cisco docs as a valid box) will not
> > work?
> >
> > any ideas?
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:53 GMT-3