From: Joe Higgins (netsat@xxxxxxxxxxxxx)
Date: Wed May 08 2002 - 15:29:00 GMT-3
RTR_A (area 0 ) e0 -- e0 RTR_B (area 0) e1---e0 RTR_C (area 0}
In the above scenario if I have the following commands on all three
routers running IOS 12.1 will the routers ospf authenticate using md5
encryption on that network segment even though on the router
configuration level I have specified plain text configuration? From
what I see it appears that if the first command ( ip ospf authentication
message-digest) is there on the interface level it does not care what,
if anything, is on the router configuration level as far as that
interface is concerned. It only looks to the router level command if
the first interface command is not present in the configuration.
router ospf 1
area 0 authentication
interface Ex
ip ospf authentication message-digest
ip ospf message-digest 1 md5 cisco
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:53 GMT-3