From: FZahrt@xxxxxxxxxx
Date: Tue May 07 2002 - 15:00:41 GMT-3
Brian,
I had to do this with my LS100. Opened a case with Cisco TAC and the PW
recovery was very cryptic...nothing like any other Cisco product. The
password to open it was like Kt43i*22&.... Something like that (that's not
it, just an example). If you have a blanket smartnet contract in your
company (the company I worked for did at the time) TAC will get you going in
no time. Hope that helps.
Regards,
Frank
Frank Zahrt III
CCDP, CCNP Voice Specialist, CCSE, FSCE
NEC Senior Network Engineer
-----Original Message-----
From: Mingzhou Nie [mailto:mnie@yahoo.com]
Sent: Tuesday, May 07, 2002 12:41 PM
To: Brian; ccielab@groupstudy.com
Subject: Re: LS100 Password Recovery
Brian,
http://www.cisco.com/warp/public/474/index.shtml
This is the Cisco password recovery master index page. I saw ls1010 is
listed.
--- Brian <signal@shreve.net> wrote:
> Anyone familiar with how to password recover a LS100? Its not listed
> off Cisco's site. I searched the archives and saw Phil (circusnuts)
> ask this
> a while back but didn't see a reply.......
>
> Brian
>
>
> -----------------------------------------------
> Brian Feeny, CCIE #8036 e: signal@shreve.net
> Network Engineer p: 318.222.2638x109
> ShreveNet Inc. f: 318.221.6612
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:52 GMT-3