From: MADMAN (dmadlan@xxxxxxxxx)
Date: Tue May 07 2002 - 11:28:14 GMT-3
Got it. Parry was really close. add "no ip split-horizon eigrp 1"
Disabling ip split-horizon doesn't do it.
Dave
"Chua, Parry" wrote:
>
> If you are refer to secondary IP address in non-link state routing protocol,
you should disable the split-horizon on that interface. You should then using f
ilter to restor the split-horizon function as necessary.
>
> > Parry Chua
> >
> >
>
> -----Original Message-----
> From: Paul [mailto:p_chopin@yahoo.com]
> Sent: Tuesday, May 07, 2002 9:16 AM
> To: dmadlan@qwest.com
> Cc: ccielab@groupstudy.com
> Subject: Re:
>
> I'm lost too man.Maybe somebody in the group?
> --- MADMAN <dmadlan@qwest.com> wrote:
> >
> > Hmmm, I see your issue now and I don't know. I
> > dinked around for a
> > little bit, even did a debug on the router with the
> > secondary and it is
> > advertising the secondary network but the neighbors
> > aren't
> > recieving/processing it.
> >
> > Dave
> >
> > Paul wrote:
> > >
> > > OK.The question is how you make secondary to show
> > up
> > > in
> > > routing tables of other routers on this
> > multiaccess
> > > network (e4/0/0).And we are running eigrp ?
> > >
> > > --- MADMAN <dmadlan@qwest.com> wrote:
> > > > It just works unless I don't understand what
> > your
> > > > asking:
> > > >
> > > > interface Ethernet4/0/0
> > > > bandwidth 1000
> > > > ip address 172.28.111.1 255.255.255.0 secondary
> > > > ip address 172.28.64.11 255.255.255.0
> > > > no ip directed-broadcast
> > > > ip router isis
> > > > no ip mroute-cache
> > > > service-policy output madman
> > > > hold-queue 100 in
> > > >
> > > > GSR#sh ip ro 172.28.111.0
> > > > Routing entry for 172.28.111.0/24
> > > > Known via "eigrp 1", distance 90, metric
> > 2587648,
> > > > type internal
> > > > Redistributing via eigrp 1
> > > > Last update from 100.1.1.1 on ATM4/0.32,
> > 00:06:34
> > > > ago
> > > > Routing Descriptor Blocks:
> > > > * 100.1.1.1, from 100.1.1.1, 00:06:34 ago, via
> > > > ATM4/0.32
> > > > Route metric is 2587648, traffic share
> > count
> > > > is 1
> > > > Total delay is 1080 microseconds, minimum
> > > > bandwidth is 1000 Kbit
> > > > Reliability 255/255, minimum MTU 1500
> > bytes
> > > > Loading 2/255, Hops 1
> > > >
> > > > the output is correct, the GSR has an OC3
> > > > interface to the 7500 on
> > > > which I added a secondary within the major
> > network
> > > > 172.28.0.0/16.
> > > >
> > > > Dave
> > > >
> > > > Paul wrote:
> > > > >
> > > > > Hi Guys,
> > > > > Here it's another interesting little problem I
> > ran
> > > > > into
> > > > > Does anybody know how to advertise secondary
> > > > interface
> > > > >
> > > > > addrese of the same major net as primary in
> > eigrp.
> > > > > I can't come up with anything but NAT, but
> > it's
> > > > not a
> > > > > prefer solutions.
> > > > > Thanks .Paul
> > > > >
> > > > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:52 GMT-3