From: MADMAN (dmadlan@xxxxxxxxx)
Date: Mon May 06 2002 - 19:14:56 GMT-3
It just works unless I don't understand what your asking:
interface Ethernet4/0/0
bandwidth 1000
ip address 172.28.111.1 255.255.255.0 secondary
ip address 172.28.64.11 255.255.255.0
no ip directed-broadcast
ip router isis
no ip mroute-cache
service-policy output madman
hold-queue 100 in
GSR#sh ip ro 172.28.111.0
Routing entry for 172.28.111.0/24
Known via "eigrp 1", distance 90, metric 2587648, type internal
Redistributing via eigrp 1
Last update from 100.1.1.1 on ATM4/0.32, 00:06:34 ago
Routing Descriptor Blocks:
* 100.1.1.1, from 100.1.1.1, 00:06:34 ago, via ATM4/0.32
Route metric is 2587648, traffic share count is 1
Total delay is 1080 microseconds, minimum bandwidth is 1000 Kbit
Reliability 255/255, minimum MTU 1500 bytes
Loading 2/255, Hops 1
the output is correct, the GSR has an OC3 interface to the 7500 on
which I added a secondary within the major network 172.28.0.0/16.
Dave
Paul wrote:
>
> Hi Guys,
> Here it's another interesting little problem I ran
> into
> Does anybody know how to advertise secondary interface
>
> addrese of the same major net as primary in eigrp.
> I can't come up with anything but NAT, but it's not a
> prefer solutions.
> Thanks .Paul
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:51 GMT-3