RE: Ping Ahmed Mamoor....

From: Rah Hussain (Rah@xxxxxxxxxxxxxxx)
Date: Sun May 05 2002 - 05:33:12 GMT-3

Next message: Nick Shah: "DLSW & BOD"
Previous message: Mas Kato: "RE: Redist: Filtering vs Fail-over"
Maybe in reply to: Nick Shah: "Ping Ahmed Mamoor...."
Next in thread: Ahmed Mamoor Amimi: "Re: Ping Ahmed Mamoor...."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Try a traceroute hehehe

He will answer soon.... watch this space--->

Regards,
Rah

-----Original Message-----
From: Lab Candidate [mailto:labccie@yahoo.com]
Sent: 05 May 2002 08:51
To: Nick Shah; ccielab@groupstudy.com
Subject: Re: Ping Ahmed Mamoor....

Pinging Ahmed Mamoor....with 32 bytes of data:

Request timed out.
Request timed out.
Request timed out.
Request timed out.

Ping statistics for Ahmed Mamoor....:
Packets: Sent = 4, Received = 0, Lost = 4 (100%
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms

---
--- Nick Shah <nshah@connect.com.au> wrote:
> Where r u ? How did u go ...
>
> Nick
> -----Original Message-----
> From: Brian <signal@shreve.net>
> To: Bill Mckenzie <bmckenzie@hotmail.com>
> Cc: ccielab@groupstudy.com <ccielab@groupstudy.com>
> Date: Sunday, 5 May 2002 3:08
> Subject: Re: (cisco 4000)DB50 serial to DB60 cable
>
>
> >I have a bunch of these.
> >
> >Brian
> >
> >
> >On Fri, 3 May 2002, Bill Mckenzie wrote:
> >
> >> I am using some Cisco 4000 routers and want to connect them to a 2600
> acting
> >> as a frame switch. Does anyone know where I can get a DB60 to DB50
> DTE/DCE
> >> cable to connect these in my lab?
> >>
> >> Thanks,
> >> Bill Mckenzie
> >>

Next message: Nick Shah: "DLSW & BOD"
Previous message: Mas Kato: "RE: Redist: Filtering vs Fail-over"
Maybe in reply to: Nick Shah: "Ping Ahmed Mamoor...."
Next in thread: Ahmed Mamoor Amimi: "Re: Ping Ahmed Mamoor...."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:50 GMT-3