From: zapeta zape (zzapeta@xxxxxxxxxxx)
Date: Sat May 04 2002 - 12:08:59 GMT-3
Hello,
I am having a problem with my isdn.For one the multicast address 224.0.0.5
is bringing the link up. By the way I am not doing any redistribution.
When I do sh ip osp neigh on R1, I don't see no neighbor id toward R2.
When I apply the same command on R2, I see that R2 is try to establish a
neighbor with R1. I already tried the no peer neighbor-route on both
command. I tried to command deb ip ospf monitor I can't apply on my routers
even I am running the 12.2 code.
Any help will be appreciated.
Thanks
Zape
R1
username r2 password 0 cisco
!
interface BRI0/0
ip address 150.10.35.1 255.255.255.252
encapsulation ppp
ip ospf priority 0
ip ospf demand-circuit
dialer map ip 150.10.35.2 name r2 broadcast 7704324217
dialer-group 1
isdn switch-type basic-ni
isdn spid1 77043242400101 4324240
cdapi buffers regular 0
cdapi buffers raw 0
cdapi buffers large 0
ppp callback request
ppp chap hostname cisco5
!
router ospf 100
router-id 150.10.1.1
log-adjacency-changes
network 150.10.1.0 0.0.0.255 area 0
network 150.10.35.0 0.0.0.3 area 0
!
dialer-list 1 protocol ip permit
r2
interface BRI0/0
ip address 150.10.35.2 255.255.255.252
no ip directed-broadcast
encapsulation ppp
ip ospf interface-retry 0
ip ospf demand-circuit
dialer idle-timeout 20
dialer map ip 150.10.35.1 name r1 class ccie broadcast 7704324240
dialer-group 1
isdn switch-type basic-ni
isdn spid1 77043242170101 4324217
ppp callback accept
ppp authentication chap
!
router ospf 100
router-id 150.10.2.2
log-adjacency-changes
network 150.10.2.0 0.0.0.255 area 0
network 150.10.35.0 0.0.0.3 area 0
!
map-class dialer ccie
dialer callback-server username
!
dialer-list 1 protocol ip permit
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:50 GMT-3