From: Robert Kinsey (Robert.Kinsey@xxxxxxxxxxxxx)
Date: Sat May 04 2002 - 09:29:26 GMT-3
Hello Phil
You need a modem that supports V.25bis and from that point on it pretty
straight forward (similar to ISDN).
Enable V.25 bis on the modem, plug a normal Cisco DTE cable into the modem
and then configure it as if it were an ISDN line.
Rob
-----Original Message-----
From: Phil [mailto:ciscostudent1@yahoo.com.br]
Sent: 04 May 2002 01:24
To: ccielab@groupstudy.com
Cc: ciscostudent1@yahoo.com
Subject: OT: synchronous dialup over serial 0 or 1 on 2500 with POTS
Howdy dial gurus,
Has anyone ever configured synchronous dialup over the synchronous serial
interfaces on the 2500 using the
serial 0 or serial 1 over POTS line?
I found in the archives how to config asynchronous dialup using the AUX port
(thanks Tim Ouellette!) but I'm
wondering if any of you guys/gals have already done that and even if it's
possible.
Many thanks,
Phil
---------------------------------
Yahoo! Encontros
O lugar certo para vocj encontrar aquela pessoa que falta na sua vida.
Cadastre-se hoje mesmo!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:50 GMT-3