From: Erhan Kurt (kurt@xxxxxxxxxxxxxxx)
Date: Fri May 03 2002 - 11:32:29 GMT-3
Hi Jeff,
For your outbound traffic, Use ebgp-multihop and put two static routes as
follows:
Ip route <provider-loopback> <your-physical-interface-1>
Ip route <provider-loopback> <your-physical-interface-2>
For your inbound traffic:
At provider side, if your interfaces are on the same router as well, make
sure they do the same manner. Otherwise, you must use MED.
Do not forget CEF or DCEF on the interfaces.
Good Luck,
Erhan
-----Original Message-----
From: Jeff Duchin [mailto:jduchin@wamnet.com]
Sent: 03 May}s 2002 Cuma 15:32
To: ccielab@groupstudy.com
Subject: Dual OC-3's to single provider
Has anyone configured a single edge router with dual OC-3 circuits to the
same provider... announcing one summary route via BGP? I want to be able to
utilize both pipes.
Thanks,
Jeff
Jeff Duchin
Design Engineer
WAM!NET Atlantic Region
13600 EDS Drive, 5N-A47
Herndon, VA 20171
Office: (703) 736-4083
Mobile: (301) 305-0122
Fax: (703) 904-4012
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:49 GMT-3