From: steven.j.nelson@xxxxxx
Date: Thu May 02 2002 - 12:35:28 GMT-3
Guys
I have a couple of 3640's running 12.1(5)T7 and I was playing around with
queuing, as per my earlier mails. Anyway I thought I'd try to use RSVP to
reserve bandwidth on a serial link but when entering the ip rsvp command and
then typing ? all I got was "ip rsvp" Ambigous command so I tried ip rsvp
bandwidth ? and I got the same result. So then I tried adding the whole
command ip rsvp bandwith 1000 500 and it worked fine, the command was
populated under the interface configuration.
I also tried to configure RSVP to reserve more bandwidth than was available
on the link, i.e I tried to reserve 10Mb on a 2Mb interface only to get a
lengthy explanation of why it wasn't possible and that the configured
amounts were QUOTE : "to plain high !"
Has anyone else seen this ?
Thanks
Steve
Steve Nelson
Customer Engineer
BT Ignite- National Solutions
T: +44 (0)1422 338881 M: +44 (0)7811 944172
e-mail: steven.j.nelson@bt.com
pp HW A170, PO Box 200(HOM-NZ), London, N18 1ZF
> British Telecommunications plc
> Registered office: 81 Newgate Street London EC1A 7AJ
> Registered in England no. 1800000.
> This electronic message contains information from British
Telecommunications plc which may be privileged or confidential. The
information is intended to be for the use of the individual(s) or entity
named above. If you are not the intended recipient be aware that any
disclosure, copying, distribution or use of the contents of this information
is prohibited. If you have received this electronic message in error, please
notify us by telephone or email (to the numbers or address above)
immediately.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:49 GMT-3