From: steven.j.nelson@xxxxxx
Date: Thu May 02 2002 - 06:25:38 GMT-3
Group
I have a scenario to allow no more than 50% of the bandwidth on an ethernet
interface, I know about the port numbers and the priority (1981 etc etc) but
I am not given any packet sizes to work with.
I am assuming that the default packet size is the standard 1500 bytes, if so
does this config look OK for 50% of the bandwidth on E0
interface Ethernet0
backup interface BRI0
ip address 135.10.56.5 255.255.255.0
ipx network 56
custom-queue-list 1
!
access-list 100 permit tcp any any eq 2065
access-list 100 permit tcp any eq 2065 any
access-list 100 permit tcp any any eq 2067
access-list 100 permit tcp any any eq 1981 ---- Just in case Priority
is added
access-list 100 permit tcp any any eq 1982 ---- Just in case Priority
is added
access-list 100 permit tcp any any eq 1983 ---- Just in case Priority
is added
queue-list 1 protocol ip 1 list 100
queue-list 1 default 2
queue-list 1 queue 1 byte-count 1500
queue-list 1 queue 2 byte-count 1500
Thanks
Steve
Steve Nelson
Customer Engineer
BT Ignite- National Solutions
T: +44 (0)1422 338881 M: +44 (0)7811 944172
e-mail: steven.j.nelson@bt.com
pp HW A170, PO Box 200(HOM-NZ), London, N18 1ZF
> British Telecommunications plc
> Registered office: 81 Newgate Street London EC1A 7AJ
> Registered in England no. 1800000.
> This electronic message contains information from British
Telecommunications plc which may be privileged or confidential. The
information is intended to be for the use of the individual(s) or entity
named above. If you are not the intended recipient be aware that any
disclosure, copying, distribution or use of the contents of this information
is prohibited. If you have received this electronic message in error, please
notify us by telephone or email (to the numbers or address above)
immediately.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:48 GMT-3