From: Craig Elrod (celrod@xxxxxxxxx)
Date: Wed May 01 2002 - 01:42:25 GMT-3
Is the "default-information originate" applicable to inject a default into
R4, such that the 151.101.0.0 would be reachable by default ?
At 12:20 PM 5/1/2002 +1000, David Ham wrote:
>Question.
>
>
> R1----R2---R3----R4
>
>R1 have two loop back 151.100.1.1/24 and
>151.101.1.1/24
>Betweem R1 and R2 , eigrp is running with /24 mask
>Between R2 and R3 , ospf is running with /24 mask
>Between R3 and R4 , igrp is running with /24 mask
>
>Two loopbacks on R1 need to be summarized.
>and R4 need to ping both loopback interfaces without
>using static. R2,R3,R4 should only see one route (
>summarized)
>
>I use ip summary-address eigrp 1 151.100.0.0
>255.252.0.0
>
>but R4 I only see 151.100.0.0 255.255.0.0 due to igrp
>is classfull routing protocol
>and i can only ping 151.100.1.1 not the 151.101.1.1
>
>Is there any way i can ping both. Not mentioning ip
>default-network.
>
>Regards,
>
>David Ham
>
>
>http://messenger.yahoo.com.au - Yahoo! Messenger
>- A great way to communicate long-distance for FREE!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:47 GMT-3