ipx watchdog-spoof replaced by ipx watchdog spoof?

From: Lupi, Guy (Guy.Lupi@xxxxxxxxxxxxx)
Date: Mon Apr 29 2002 - 21:18:29 GMT-3

• Next message: Bruce Evry: "DC Meeting - Router Roast Saturday"
• Previous message: Chuck Church: "RE: Dot1Q trunk vs ISL trunk"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
I was reading the command reference for ISDN, and I found this:

ipx watchdog

This command was introduced. This command replaces the ipx watchdog-spoof
command.
Syntax Description
filter
Discards IPX server watchdog packets when a DDR link is not connected.
spoof
Answers IPX server watchdog packets when a DDR link is not connected.
enable-time-hours
(Optional) Number of consecutive hours spoofing is to stay enabled. Values
are 1 through 24.
disable-time-minutes
(Optional) Number of consecutive minutes spoofing is to stay disabled.
Values are 18 through 1440

I am kind of confused about the enable and disable time values, I would
think that you would always want spoofing enabled. If someone could explain
this I would appreciate it. It seems that if you don't specify the enable
and disable times, the command shows up in the config as the old ipx
watchdog-spoof, but if you do specify the times it shows up in the new
format. So should we always specify an enable and disable?

• Next message: Bruce Evry: "DC Meeting - Router Roast Saturday"
• Previous message: Chuck Church: "RE: Dot1Q trunk vs ISL trunk"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:22 GMT-3