From: Engelhard M. Labiro (engelhard@xxxxxxxxxxxxxx)
Date: Sat Apr 27 2002 - 02:23:41 GMT-3
Yes, I also would like to know how to set to be able to send
more than 15 lines at a time.
I have around 60 aliases plus some usefull commands that
need to be sent to all sessions connected to the terminal.
Right now I have to group the aliases to 15 lines and sent
it one group at a time.
----- Original Message -----
From: "ying chang" <ying_c@hotmail.com>
To: <brian@5g.net>; <Brent_Gardner@icgcomm.com>; <ccielab@groupstudy.com>
Sent: Saturday, April 27, 2002 7:56 AM
Subject: RE: Using the "Send *" command
> Brian,
>
> My Hyperterm line delay is 300ms, I could only send about 10 lines at a
> time. I remember I have the same problem when I use telnet. It will be a
> great help if we can clone your setup.
>
> Thanks,
> Chang
>
>
> >From: "Brian Dennis" <brian@5g.net>
> >Reply-To: "Brian Dennis" <brian@5g.net>
> >To: "'Gardner, Brent'" <Brent_Gardner@icgcomm.com>,
> ><ccielab@groupstudy.com>
> >Subject: RE: Using the "Send *" command
> >Date: Fri, 26 Apr 2002 14:50:48 -0700
> >
> >Brent,
> >How many lines are you trying to send? I just sent 800 lines without a
> >problem.
> >
> >
> >Brian Dennis, CCIE #2210(R&S/ISP Dial)
> >bdennis@5g.net
> >5G Networks, Inc.
> >
> >-----Original Message-----
> >From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> >Gardner, Brent
> >Sent: Friday, April 26, 2002 2:03 PM
> >To: 'ccielab@groupstudy.com'
> >Subject: Using the "Send *" command
> >
> >Does anyone know how to increase the number of lines that can be sent
> >from
> >the terminal server to the attached console ports using the send *
> >command?
> >
> >Thanks,
> >
> >Brent
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:20 GMT-3