From: Frank Jimenez (franjime@xxxxxxxxx)
Date: Fri Apr 26 2002 - 16:56:41 GMT-3
Watch the word wrap:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122relnt
/xprn122t/122tnewf.htm
"802.1Q encapsulation is supported on the built-in ethernet ports of the
Cisco 2610, 2611, and 2612 in Cisco IOS Release 12.2(2)T and later
releases. The NM-1E, NM-4E, NM-1E2W, NM-1E1R2W, and NM-2E2W do not
support 802.1Q in Cisco 2600 or 3600 series routers."
So you won't see it at the CCIE lab (12.1 only in the lab so far), but
this will make it work at your home study lab.
Good luck, all...
Frank Jimenez, CCIE #5738
franjime@cisco.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Mingzhou Nie
Sent: Friday, April 26, 2002 8:36 AM
To: Bruce Williams; Robert M. Yee; chih_chung@hotmail.com;
ccielab@groupstudy.com
Subject: RE: Cisco IOS Version for 2600 Ethernet Trunking
Neither ISL nor 802.1q is supported on ethernet interface.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/
switch_c/xcprt7/xcdvl.htm#xtocid11
--- Bruce Williams <bruce@williamsnetworking.com> wrote:
> If you find out, please let me know because I am having a problem with
> my 2612 FastEthernet ports. I can configure an ISL trunk port between
> my 2612
> and my CAT 2901, but the traffic does not traverse the trunk.
>
> Bruce
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Robert M. Yee
> Sent: Wednesday, April 24, 2002 6:45 PM
> To: chih_chung@hotmail.com; ccielab@groupstudy.com
> Subject: RE: Cisco IOS Version for 2600 Ethernet Trunking
>
>
> John,
>
> Why are your e-mails to the group coming up with MY NAME?
>
> The 'REAL' Robert M. Yee
>
> -----Original Message-----
> From: Robert M. Yee [mailto:chih_chung@hotmail.com]
> Sent: Wednesday, April 24, 2002 2:37 PM
> To: ccielab@groupstudy.com
> Subject: Cisco IOS Version for 2600 Ethernet Trunking
>
>
> I tried to find it in the archive but couldn't find it. Does anyone
> know what version of IOS enables 2610 ethernet 10BaseT port to do
> trunking.
> Thank you very much.
> -John
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:20 GMT-3