From: yakout esmat (yesmat@xxxxxxxxxxxxxx)
Date: Wed Apr 24 2002 - 21:32:36 GMT-3
The way I understand it is:
DLSW always use non-can mac format between peers regardless.
If the question for example says to filter mac address of SNA host (token
ring) then we should use the same format given (just make sure it is
non-can)
If the question says to filter mac address of ethernet server then we will
need to convert that to non-can (just make sure that the format given in the
question in not already converted to non-can)
Hope my understanding is correct.
Ya
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Zhang, Stan
Sent: Thursday, April 25, 2002 1:25 AM
To: 'Sam.MicroGate@usa.telekom.de'; Dennis.D.Adekola@britishairways.com
Cc: ccielab@groupstudy.com
Subject: RE: MAC address format
Sam,
That really depends on how the question is asked. If the questions asks in
DLSW section, 'Please filter the Ethernet segment on VLAN_A with the
MAC-address of 1111.2222.3333 from Router_A to Router_B' Then, you should
definitely convert the address below. Otherwise, if they do not specify
what type of MAC address it is, then I would ask the proctor to clarify the
questions.
Stan Zhang
-----Original Message-----
From: Sam.MicroGate@usa.telekom.de [mailto:Sam.MicroGate@usa.telekom.de]
Sent: Wednesday, April 24, 2002 10:56 AM
To: Dennis.D.Adekola@britishairways.com
Cc: ccielab@groupstudy.com
Subject: RE: MAC address format
Dennis,
Let be more precise, if I am asked to filter (deny or permit) this address
mac 1111.2222.3333 in a dlsw question, should I type the mac address
8888.4444.cccc in my access-list command?
Sam
-----Original Message-----
From: Dennis.D.Adekola@britishairways.com
[mailto:Dennis.D.Adekola@britishairways.com]
Sent: Wednesday, April 24, 2002 10:43 AM
To: Sam.MicroGate@usa.telekom.de
Cc: ccielab@groupstudy.com
Subject: Re: MAC address format
All address formats in DLSW are in Non Canonical format (token ring style)
Dennis
Sam.MicroGate@usa.telekom.de@groupstudy.com on 24/04/2002 15:12:01
Please respond to Sam.MicroGate@usa.telekom.de
Sent by: nobody@groupstudy.com
To: ccielab
cc:
bcc:
Subject: MAC address format
Hello everyone,
I need to know which MAC address format to use when I configure dlsw
filters. Is it can or non-can?
Elsayed Mohamed
Sr. Network Consultant
Microgateds, Inc.
732-936-4413
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:19 GMT-3